Garage Door Repair in Allentown Ideas


Garage door repair in Allentown is often done by the homeowner themselves. There are 5 simple things that can be checked before contacting an expert. Some repairs are very easy. For example, a squeaky or a stiff door will just require a good lubrication and cleaning. Other repairs, like torsion spring repair, are extremely unsafe and require aid from a professional.

Before starting the repair, ensure to unplug the garage door opener, in order to avoid getting an electric shock during garage door repair. You will most probably be standing on a ladder while carrying out repairs which makes it possible to get electric shocks. Remember to use safety glasses while working with power devices.

The following list shows things one can check before contacting an expert for garage door repair in Allentown:

1. Check for Damages in the Metal Tracks

This effortless garage door repair advice may often solve the problem quite fast. The metal tracks may have bumps or dents regularly. If you get this forms of damages, strike the damaged area of the track with a hammer and a wood block to make the track straight.

2. Check the Tracks Alignment

If the tracks are not well aligned, they may stop the door from working completely. It’s not always a must to loosen the tracks; you can simply try to loosen the screws or bolts and tap the tracks a little into position. Use a level to confirm if the track alignment has been fixed. Tracks aligning is a simple task and its gets done in a short time!

3. Ensure the Tracks are clean and dry

Even though this sounds obvious, yet old lubricant and hardened dirt may be the reason your garage door is sticking. In this scenario, the garage door repair will consist of just cleaning and drying of the tracks. Regular cleaners can be used to clean the tracks.

4. Lubricate the Rollers and the Tracks

By just lubricating both the rollers and the tracks, you can fix the problem and wind up your garage door repair in an instant. For lubrication, you can use a silicon spray or a lubricant spray. It would be better if you lubricate the tracks after they have been cleaned. Essentially, any movable area will gain from lubrication.

5. Tightening the Loose Screws and Bolts

Bolts and screws have a tendency of becoming loose with time. Check for all of the bolts and screws concerned with the opening and closing mechanism of the garage door. Sometimes, a mere tightening would solve the entire problem. If you can’t tighten the screws, due to the holes becoming loose, then you may use ordinary wood pieces or a “wood filler” to fill the holes.

What not to do?

If you have attempted each of the above repairs, and none of them has worked, the problem could be the door spring. Though, it is advised you stop performing the garage door repair when the problem appears to be the spring, particularly if it is a torsion spring. Unluckily, there have been many cases, where individuals have gotten injured and at times killed by the door springs.